Readers like you help us earn affiliate commissions when you click and buy from links on our site. Learn more.

43 Best e3d Black Friday Deals in 2022 [Discounts Upto 29%]

The Black Friday 2022 is not very far and if you’re planning to get a e3d and if you’re not in a hurry, it’s totally worth waiting. Based on my research, you’d end up saving anywhere around 29 on all your purchases. So why pay extra when you can save huge by waiting for 1 month.

Back in time, the main problem was to find a Black Friday deal or one had to get into crowded marketplaces, but things have changed now and with eCommerce websites like Amazon booming, there are many live deals going on.

However, that’s not a problem, the main problem is — finding the right deal and not falling for the fake price discount trap (sellers increase the listing price during the sale just to make a customer feel that they’re getting huge discounts.)

1. Genuine E3D Prusa V6 HotEnd for Prusa MK3 3D Printer (24V) (Kit) -Business, Industry & Science

by E3D
  • One that all other HotEnds want to be; one that all printers want to be with.
  • CONTAINS PRUSA SPECIFIC COMPONENTS: designed for better function with Prusa printers and to improve retractions with the Prusa Multi Material Upgrade
  • A DROP-IN REPLACEMENT FOR PRUSAS: A fully assembled, replacement HotEnd designed for Prusa MK3 and MK3S
  • CUSTOMIZABLE TO SUIT ANY NEED: Upgradeable to take your 3D printing game to the next level with: high temperature printing, high speed printing, abrasive printing and medically-sterile printing to name a few.
  • THE MARKET-LEADING HOTEND, FOR THE MARKET LEADING PRINTER: The cool kid of HotEnds
  • OPTIMISED FLOW RESPONSE: Meticulously designed and perfected internals mean consistent filament flows and far less blockages than clones can offer.

2. Genuine E3D V6 HotEnd Kit for 3D Printer: High Performance 3D Printing (1.75mm) (24V, Bowden) -Business, Industry & Science

by E3D
  • CUSTOMIZABLE TO SUIT
  • THE MARKET-LEADING HOTEND: The cool kid of HotEnds
  • APPROVED BY JOSEF PRUSA: the HotEnd of choice for not only Prusa, but also BCN3D, Lulzbot, German Reprap, Dagoma, Kodak, Jellybox, and more.
  • One that all other HotEnds want to be; one that all printers want to be with.
  • OPTIMISED FLOW RESPONSE: Meticulously designed and perfected internals mean consistent filament flows and far less blockages than the clones.
  • NEED: Upgradeable to take your printing to the next level with high temperature printing, high speed printing, abrasive printing, medically-sterile printing to name a few.
  • OVER 50,000 customers in over 50 countries delighted with their V6 purchase.

3. Genuine E3D Nozzle X for V6 HotEnd Kit 3D Printer (3mm, 0.4mm) -Business, Industry & Science

by E3D
  • UNTOUCHED BY SPICY FILAMENTS: Print at high temperatures (up to 450C) without losing nozzle hardness.
  • NANO-COATED WITH A POLYPHOBIC LAYER: to keep filament from sticking to the end of your nozzle.
  • THE MOST COST EFFECTIVE PREMIUM NOZZLE OUT THERE: Achieve flawless prints with industrial grade PEEK, standard PLA and everything in between without breaking the bank
  • UNPHASED BY COARSE FILAMENTS: Print abrasives forever without nozzle degradation.
  • THE ONE NOZZLE TO RULE THEM ALL: Forged from a tool steel, Nozzle X can print any filament known to man.

4. Genuine E3D Brass Nozzle Triple Pack 0.4mm, 0.6mm for V6 HotEnd 3D Printer… (1.75mm, 0.4mm) -Business, Industry & Science

by E3D
  • 20% OFF!: Get an Amazon exclusive discount on this triple pack
  • Even cheaper than on our own website!
  • E3D’s TRADEMARK DESIGN: Far better optimised flows than any of the clones out there.
  • DON’T GET CAUGHT WITH YOUR TROUSERS DOWN: Make sure you’ve always got a spare nozzle or two in case of printing related emergencies.
  • WIDE COMPATIBILITY: Fits any HotEnd using the m6 thread.

5. Genuine E3D Hemera Extruder HotEnd Kit for 3D Printer (1.75mm, Direct) (24V, Kit) -Business, Industry & Science

by E3D
  • UNPARALLELED FLEXIBLE PERFORMANCE – Hemera handles flexibles like a boss, fact
  • Find upgrade guides for your Ender3, CR10, Lulzbot, Tevo, Duplicator and more, over on the E3D website.
  • It has its own custom motor, based on a NEMA17 frame, with E3D faceplates allowing us to add our own cool features like T-Slots.
  • With its fully constrained filament path also significantly improving the results you see with normal materials such as PLA or PETG.
  • TWICE THE GRIP WITH NONE OF THE SLIP- E3D Hemera utilises dual-drive gears which provide a huge boost in grip compared to single drive systems.
  • BREEZY UPGRADE- We’ve made upgrading easy
  • A NEVER BEFORE SEEN HEATSINK – This NEW heatsink design ensures airflow is diverted up and away from both the HotEnd and the heated bed, meaning airflow does not disrupt the print envelope.
  • COMPACT – Hemera is a system of components designed to work seamlessly together as a single product

6. WINSINN 3D Printer Sensor Heater Block, Compatible with E3D V6 J-Head RepRap Bowden Hotend Extruder For HT-NTC100K PT100 – Aluminum (Pack of 5Pcs) -Business, Industry & Science

by WINSINN
  • ️For V6 nozzle (M6 Screw)
  • ️Material: Aluminum alloy
  • ️Made by WINSINN
  • ️New V6 Sensor Heater Block – For HT-NTC100K PT100 sensor cartridge
  • ️With Allen wrench, Easy to install

7. Saipor V6 Stainless Steel Throat Tube with Teflon(6pcs), All-Metal Hot End 1.75mm for E3D V6 Makerbot Reprap 3D Printers Accessories -Business, Industry & Science

by Saipor
  • Durable and stable performance
  • MaterialMade of stainless steel with high temperature resistance and ablation resistant!
  • SizeV6 throat tube with 22.5*6mm (0.88″*0.24″)
  • Usage Compatible with all 1.75mm E3D V6 Makerbot 3D printer, fits V6 1.75mm Extruder hot end
  • Anti-blocking DesignTube effectively prevents heat transfer, avoids material swelling and clogging when the printer is working
  • Outer diameter: 6mm/0.24″, Inner Diameter: 4mm/0.16″
  • Smooth & Leak-proof The pipe surface is neat and smooth, and fits with the docking accessory to prevent material leakage

8. 1 Pieces E3d V6 Heatsink, 3D Printer Throat Aluminum Alloy Heatbreak Extruder Radiator 1.75mm V6 Hotend for 3D Printer -Business, Industry & Science

by Yangfei
  • √Essential 3D Printer Part: Heatbreak can effectively prevent heat transfer, avoid material expansion and blockage when the 3d printer is working.
  • √Premium Material: E3d v6 heatsink is made of high-quality aluminium alloy, sturdy, high-temperature resistant and ablation resistant
  • √Size: The size of v6 hotend is 4.4*2.1*2.1cm
  • The outer diameter is 2.1cm and the inner diameter is 0.42cm.
  • √Smooth And Leakproof: The interior of 3d printer throat is smooth and clean, avoid material leaking and greatly improve the stability of printing.
  • Serve you a long time.
  • √Compatibility: Extruder radiator is compatible with 1.75mm e3d v6 Makerbot 3d printer.

9. Genuine E3D V6 Volcano HotEnd Kit for 3D Printer (1.75mm) (Bowden, 12V) -Business, Industry & Science

by Volcano
  • INTEGRATABLE WITH THE E3D ECOSYSTEM: Easily swap your Volcano heater block and nozzles to V6 for more detailed 3D printing.
  • E3D’s TRADEMARK DESIGN: Better optimised flows than that of clone Volcano HotEnds
  • OPTIMISED FOR LARGE SCALE 3D PRINTING: Print with upto 3x the volumetric flow rate of the standard V6.
  • PRINT HARDER BETTER FASTER STRONGER WITH VOLCANO: Print faster and stronger parts with Volcano’s improved flow rate.

10. Genuine E3D Plated Copper Nozzle 0.4mm, 0.6mm Triple Pack for V6 HotEnd 3D Printer (1.75mm, 0.4mm) -Business, Industry & Science

by E3D
  • 20% OFF!: Get an Amazon exclusive discount on this triple pack
  • UNPHASED BY SPICY FILAMENTS: Print at high temperatures (up to 500C) without losing nozzle hardness.
  • E3D’s TRADEMARK DESIGN: Far better optimised flows than any of the clones out there.
  • WIDE COMPATIBILITY: Fits any HotEnd using the M6 thread.
  • DON’T GET CAUGHT WITH YOUR TROUSERS DOWN: Make sure you’ve always got a spare nozzle or two in case of printing related emergencies.
  • Even cheaper than on our own website!

11. BIQU Direct Bimetal Heat Breakage Bimetal Heat Breakage 3D Accessory for E3D V6 HOTEN for E3D V6 Volcano HOTEN Prusa I3 MK3 / MK3S Heat Breaking 1.75 mm Filament -3D Printers

by BIQU
  • We use a special process to hold them firmly together
  • Bi-Metal Heatbreak with a rating of 450°C, the filament melts faster and conducts 60% less heat over the fracture zone than competing heatbreaks
  • Compatible with E3D V6 Heat Block and E3D PT100 V6 Heat Block
  • You don’t have to worry about it getting damaged
  • It consists of two components with different thermal conductivity
  • Bi-Metal Heat Shield Compatible with E3D Heatsink, E3D Volcano Heat Block, E3D PT100 Volcano Heat Block
  • It consists of 3 parts
  • Compatible with Prusa I3 MK3 / MK3S

12. 8 Pcs 3D Printer Silicone Sock Hotend for E3D-V5/ Anycubic Kossel/Mega I3/ I3-X/ I3-S/ 4Max PRO Heating Aluminum Block Blue -Business, Industry & Science

by Create idea
  • Note: The temperature range of the silicone sock is within 250 degrees of the temperature of the print head.
  • Made of heat-resistant, non-stick silicone material, it will keep your heater block clean and repel plastic of burnt, blackened and build-up.
  • 8 pieces 3D printer silicone covers in blue color, enough quantity to meet your needs.
  • The silicone socks support PLA / ABS / TPU / HIPS / WOOD / PETG and other materials, hsa good temperature resistance and longer service life
  • With good heat preservation performance, these can effectively keep the temperature of the heating block stable.
  • Well compatible with Anycubic Mega I3/ I3-X/ I3-S/ 4Max PRO/ Kossel/ Chiron/ Predator, also E3D-V5.

13. Rustrak 30pcs 3D Printer Nozzle kit Brass J-Head Extruder Print Heads 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1mm Tools with 2 Pack Spanner for E3D V5 V6 Nozzles Replacement Removal -Business, Industry & Science

by Rustark
  • √EXQUISITE CRAFTSMANSHIPRustark 3D Printer Extruder Nozzle is made of high-quality brass with Smooth Surface, Hardness, High Precision and Thermal Conductivity
  • √INSTALLATION TOOLCome with 2 different sizes of spanner, 17 mm and 21mm
  • More importantly, the silk output from the extruder nozzle is uniform, because there is no burr in the smooth interior
  • We will reply you within 12 hours and we will try our best to solve the problems until you are satisfied.
  • J-Head design could reduce material, increase the filament forming speed and avoid blocking.
  • √RELIABLE AFTER-SALE SERVICEWe offer you reliable after-sales service
  • 2 piece open end spanner totally,1pcsx17mm, 1pcsx21mm.
  • The spanner is a good helper, made of top-quality mental, sturdy and durable, wear Resistance
  • √MULTIPLE SIZEThe set contains 7 sizes of J-Head E3D extruder nozzle, including: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1mm
  • It is more convenient and easier for you to replace or install the 3D Printer Extruder Nozzle.
  • If you have any questions about our products or any problems with your packages, please feel free to contact us
  • Welcome to purchase.
  • The set is not only suitable for M6 thread, but also for MK8 MK7 UM2 CR10 etc
  • One convenient set could meet your various needs
  • The Clear Letters on the surface make it easy to distinguish sizes so that you could choose the suitable one effectively
  • √PACKAGE INCLUDE28 piece 3D Printer Extruder Nozzle in total,3pcs x 0.2mm, 3pcs x 0.3mm, 10pcs x 0.4mm, 3pcs x 0.5mm, 3pcs x 0.6mm, 3pcs x 0.8mm, 3pcs x 1.0mm

14. 6 PCS Silicone Socks 3D Printer Heater Block Silicone Cover for E3D V6 PT100 Heater Block(Blue and Black) -Business, Industry & Science

by Aipaide
  • PREMIUM SILICONE MATERIAL:Made of quality silicone material,e3d v6 silicone sock is soft, durable, high-temperature resistant, safe and odorless.
  • So it really helps when use sticky materials like co-polyesters and filled-composite which are easy to build up on nozzles.
  • STABILIZE TEMPERATURE:3D printer silicone cover has good thermal insulation properties.It can effectively maintain the temperature of the heater block; Especially if you use high flow of cooling air around the nozzle to cool the print, it can effectively prevent the temperature of heater block from cooling down to improve the print quality.
  • It also can keep heat inside the hotend to improve the print quality and extend the life of the heater block.
  • HIGH-TEMPERATURE RESISTANT:3D heater block cover is heat-resistant and non-stick.It will repel build-up of molten plastic
  • Application:3D heater sock is only suitable for E3D V6 PT100 3D printer heater block.(You can check the size before your purchase)
  • PROTECT HEATER BLOCK:3D printer silicone sock can keep your heater block clean by preventing from burnt and blackened plastic

15. Free e3D Offroad Stunt Bike -Apps & Games

by Dexterapps
  • Upgradable features for quad bike
  • Bumpiest ride with extreme landscape
  • Supercross racing environment
  • Awesome track for quad bike
  • 3 different 3D environments
  • Challenging obstacles and hurdles to avoid

16. 3D Printer Heater Block Silicone Socks Cover for E3D V6 PT100 Extruder Hotend Blue Color Eewolf -Business, Industry & Science

by Eewolf
  • Professional for e3d pt100 3D printer extruder.
  • High temperature resistance: 200℃
  • Can extend the life of the heater block and extruder by keeping it cleaner.
  • Helps to keep the hot end temperature extremely stable.
  • Made of non-stick silicone material

17. SIMAX3D(30PCS*E3D V6) Brass 3D Printer Nozzles Set,Size 0.2MM-0.3MM-0.4MM-0.6MM-0.8MM-1.0MM Extruder Nozzles+Stainless Steel Cleaning Needles for CR10,Ender 3,Anycubic i3 Mega,Prusa i3 -Business, Industry & Science

by SIMAX3D
  • [High Precision] The 3D Extruder V6 Nozzles can prevent print head from leakage effectively and produce consistent prints with smooth and glossy polish
  • [Quality service] you have any quality problems please contact us, we will not more than 24 hours for your service.
  • Reduce the resistance from the corners and avoid blocking of the filament with rounded chamfer
  • [Premium Quality] The 3D Printer Nozzles are made of high quality brass material and Hardened tungsten steel
  • Easy to identify with engraving the size on each nozzle.
  • Heavy duty and provide a long service life.Easy to install and change.Made with centering CNC precision automatic lathe and one-time forming technology, make sure the input and output holes are concentric and the interior of nozzle is smooth without burrs.
  • 0.2mm,0.3mm,0.4mm,0.6mm,0.8mm,1.0mm,size nozzles meet all the printer’s nozzle need.
  • Our nozzles fit for for Anycubic i3 Mega – Prusa i3,1.75mm PLA ABS 3D Printers.
  • [Applicability and Compatibility] Suit to almost all FDM printer,could install to V6 heating block
  • [Value Match] The brass nozzles match the hardened steel nozzles together let you enjoy different printing experience

18. Iverntech 10 pcs Extruder Nozzle for E3D V6 3D Printer High Temperature Hardened Steel Nozzles 0.4mm, Compatible with Anycubic i3 mega, Anet8, Prusa i3 -Business, Industry & Science

by Iverntech
  • Packing with 10Pcs 0.4mm V6 Hardened Steel Nozzle
  • Out thread: M6
  • You can contact us if there are any questions , we will do our best to deal with it and give you a satisfactory answer
  • The inner wall of the Hardened Steel nozzles is much smoother and has no burrs, good abrasion resistance, heat resistance and corrosion resistance, provide you a accurate and smooth extrusion
  • V6 hardened steel nozzles compatibe with V5 V6 hotend 3d printers like Monoprice select mini, Prusa i3, Anet8, Anycubic i3 mega, Kossel etc.

19. Silicone Sock Hotend 3D Printer Parts Compatible for E3D-V5 / Anycubic Original Heating Aluminum Block – 5 PCS -Business, Industry & Science

by KINGPRINT
  • 3.The heat-insulating sleeve has good heat-insulating characteristics, which can effectively keep the temperature of the heating block stable.
  • Long-term temperature above 250 degrees will damage the silicone sleeve.
  • 1.Better temperature resistance and longer service life
  • 4.It is made of heat-resistant silicone, which can effectively keep heating and not stick to other printing materials
  • 2.Has a certain role in preventing burns.
  • Support PLA / ABS / TPU / HIPS / WOOD / PETG and other materials.
  • Easy to clean around the nozzle.
  • 5.Please Note If your print head temperature is above 250 degrees for a long time, please remove your silicone sleeve

20. ANYCUBIC 5Pcs 0.4mm Brass 3D Printer Nozzle Print Head M6 Threaded Nozzle for MEGA 1.75mm ABS PLA Filament -Business, Industry & Science

by ANYCUBIC
  • Pointed mouth,compatible with most 3d printer extruder The appearance of nozzle is bright.
  • Package Include: 5* 0.4mm 3D printer nozzle.
  • 45°chamfer design,much easier for filament feeding.
  • Smooth mating face,effectively prevent filament from leaking.
  • Nozzle diameter size was carved, easier to be identified.

Related Articles :

21. NTC Thermistor Cartridge 100k for Prusa i3 Reprap 3D Printer -Business, Industry & Science

by TCMUK3D
  • NTC Thermistor 3mm diameter x 15mm Brass Cartridge 100k Ohm 4267K
  • It will read slightly low but this is the best fit
  • Product has been tested on our in house machines and is a direct replacement for e3d original item no software or hardware modification required
  • Now includes 900mm extension lead, length including cartridge and molex connector 975mm
  • For other printer types select marlin type 05 thermistor
  • Crimped cartridge & Fibre glass sleeved for improved strain relief and heat protection
  • if you would like to have a copy of the resistance table for increased accuarcy please message the seller.
  • Compatible with latest PT100 style e3d V6 & Lite6 Hot Ends including Prusa I3 Mk2 Heads

22. SIMAX3D Upgrade Titan Extruder Parts Compatible with CR10, Ender 3 Series DIY 3D Printer Compatible with E3D V6 Hotend J-Head Bowden Mounting Bracket 1.75mm PLA Filament -Business, Industry & Science

by SIMAX3D
  • It can be used for V5 and V6 hotend
  • High CompatibilityLarge feeding torque and light weight
  • 100% QUALITY ASSURANCEif you are not satisfied with the product, please contact us in time, we will solve your problem within 24 hours and provide warranty.
  • Function InstructionIt is mainly optimized remote printing, which has decreased the weight of extruder, thus privides higher moving speed and better precision.
  • Direct Drive SupportedWith new design injection molding and high transmission ratio ,this upgrading Titan extruder kits also support direct extrusion
  • Our Titan Dual Drive extruder can be used with all the 1.75mm 3D printing filament, including PLA/ABS/PETG/Carbon Fiber, and soft filament like TPU
  • It can fit with most DIY 3D printers.
  • Quality AssuranceEquipped with the high-strength engineering materials, which makes our Titan extruder aging resistant.

23. 3Dman Nozzles M6 0.4mm Brass Extruder Nozzles Print Head for 3D-M6 1.75mm Filament 3D Printer Parts -20pcs -Business, Industry & Science

by 3Dman
  • The shape is smooth and glossy with lettering, the chamfer is rounded, which can reduce the resistance of the corners, and avoid blocking of the filament, and the contact surface is smooth, which can effectively prevent print head from leakage.
  • Widely used for 1.75mm PLA filament.
  • Also,there is a spanner which is more convenient to make a replacement for the Nozzle.
  • Hexagon extruder brass nozzle print head with different lettering, which is easy for you to identify, and the screw head connection can be connected well with the other end
  • Bore diameter: 0.4mm.
  • Screw thread inner diameter: 1.75mm.

24. YONMEIA 24V 40W Heater Cartridge 620 Ceramic Hotend for 3D Printer Prusa Mendel (Pack of 5pcs) -Business, Industry & Science

by YONMEIA
  • Compatible with Creality CR-10S Pro,CR-X,Ender 3, Ender 3X, Ender-3 Pro 3d printer,Anet E10 etc
  • Package Contents: 5x 24V 40W Cartridge Heaters
  • Cartridge heaters is consist of a cylindrical stainless steel tube and thus provide a high corrosion prevention
  • Voltage: 24v, Power: 40w, Conveniently pre-wired with 1 meter long high temperature Teflon insulated wiring
  • Heater Material: 304 Stainless Steel,Diameter: 6mm ; Length: 20mm

25. 3D Printer Thermistor HT-NTC 100K Temp Sensor +300 Degrees for Hot End Heater Block 3×15 3950 Wiring Female 2Pin XH2.54 -Business, Industry & Science

by Cavabien
  • Upgrade HT-NTC100K Thermistor: head cylinder diameter 3mm, length 15mm, can be used with the heating block that support the thermocouple.
  • Please check if the hole of your heat block is big enough to insert the thermistor.
  • The high temperature line is double thicker than others in the market, not easy to break off.
  • Adopts 304 stainless steel, with the internal temperature package to ensure the maximum service life with precision temperature measurement.
  • Working temperature: -50 °C ~ +350 °C, can replace the original K-type thermistor, very fit for printing high-temperature filament.
  • The wires adopts line connection, the customer can tear the wires depends on their application

26. HAWKUNG 29pcs 3D Printing Tool Kit, 10pcs 0.4mm Nozzle + 15pcs Cleaning Needle (10 x 0.35mm + 5 x 0.4mm) + 2pcs Tweezers + 2pcs Spanner for 3D Printer V6 Nozzle Replacement, Clean, Installation -Business, Industry & Science

by HAWKUNG
  • Special spanner can help you adjustment 3D Printer and change extruder nozzle more easy
  • V5 V6 nozzles: material:brass,thread type: M6,output diameter:0.4mm;Input filament diameter:1.75mm,compatible: V5 and V6 extruder hotend Filament,supported:ABS/PLA/PETG/Carbon Fiber
  • Wrenches: Wrenches make nozzle installation and removal easier
  • Tweezers: 3D printing tweezers are suitable for maintenance nozzles and cleaning excess support material; it is anti-static, non-magnetic precision tweezers.
  • Needle: 10 flexible stainless steel needles for gentle maintenance of your nozzles and difficult to reach places such as feed gears.
  • Total 29pcs include: 10pcs brass nozzle, 10pcs 0.35mm cleaning needles, 5pcs 0.4mm cleaning needles, 2pcs precise tweezers, 2pcs Spanner, 1pcs plastic bottle.
  • Nozzle spanner suitable for nozzles with a diameter of 8 mm, for V5 V6 nozzles.Aluminum block spanner only fit for V6 heat block.

27. NTC Thermistor Cartridge 100k B3950K Anet 3D Printers V6 PT100 style heatblock -Business, Industry & Science

by TCMUK3D
  • Compatible with latest e3d V6
  • NTC Thermistor 100k Ohm 3950K
  • 3mm diameter x 15mm Brass Cartridge

28. 1.75mm M6 V6 E3D Heat Break Throat Tube Stainless Steel Heatbreak Fit for 3D Printer CR-10 Ender 3 Hotend Pack of 4 -Business, Industry & Science

by YINETTECH
  • Made of stainless steel, corrosion resistant and wear resistant.
  • Compatible with 1.75mm CR-10 Ender 3 V6 Makerbot 3D printer .
  • Effectively prevents heat transfer, avoids material swelling and clogging when the printer is working.
  • M6 thread, 26mm long, for V6 1.75mm Extruder hot end.
  • 4Pcs nozzle throat tubes, no PTFE tube inside.

29. Redrex Metal Bowden Extruder Upgrade Spring Adjustable Feeder with Bowden Tube and Springs for Creality Ender 3 V2 Ender 3 Pro Ender 5 CR10 3D Printers(Right Hand Version) -Business, Industry & Science

by Redrex
  • Recommend Filaments: The new upgrade metal aluminium alloy extruder works great with PLA/ABS/Wood/Hips/Flexible/PTEG
  • 40 teeth drive gear feeds the 1.75mm filament very smoothy.
  • Application:The all metal bowden extruder is compatible with Ender 3 V2,Ender 3 Pro,Ender 3,Ender 5 and CR10 series 3D printer.
  • Rod Diameter (ID) : 4.4mm/0.18″.
  • 2mm±0.05mm inner diameter reduces the “wiggle room” or buckling.
  • Bowden Tube :The Bowden Tube is developed specifically for 1.75mm filament with an extremely precise internal diameter
  • Bed-leveling Springs:Length:20mm/0.78″ Outside Diameter(OD) : 8mm/0.31″
  • Spring Adjustable Design: The extrusion spring tension could be adjusted by tighten the screw,which greatly improves the printing quality and accuracy.

30. UniTak3D All Metal Hotend Mounting Bracket Compatible with V6 Dragonfly BMO for Ender 3 V2 Ender 3 Pro Ender 5 Pro CR10 3D Printer -Business, Industry & Science

by UniTak3D
  • Kindly Reminder: Package comes with all the hardware for assembling and extra hardware to attach hotend.For printable accessories files,please search “4117436” on Thingiverse.
  • Adjustable Height: The hotend bracket can be adjusted to the right height based on your needs.
  • Durable Material:The all metal bracket is made of quality material – Anodized 6061-T6 aluminum,perfect flatness, beautiful anodized finish, flawless fit.
  • Easy Installation:This mount attaches the V6 Volcano hotends to a wide variety of Creality 3D printers without the need for a Z stop height adjustment. It also allows for many cooling options and auto-leveling sensor.
  • Application: This hotend mount is compatible with Ender 3, Ender 3 Pro, Ender 3 V2,Ender 5, Ender 5 Pro, Ender 5 Plus,CR10, CR10S, CR10 4S, CR10 5S, CR10 MINI, CR10 Max,CR20 ,but NOT compatible with CR10 V2/V3.

31. YOTINO 14 Pcs M6 Extruder Nozzles 3D Printer Nozzles M6 Brass Nozzle Extruder for 3D Printer 0.2mm / 0.3mm / 0.4mm / 0.5mm / 0.6mm / 0.8mm / 1.0mm – 2 Pcs Each Size -Business, Industry & Science

by YOTINO
  • Material quality Made of brass, increase the printing speed, the wire does not block the nozzle.
  • 7 Sizes Brass nozzle of different sizes to meet your request.
  • Application They are compatible with PLA ABS 1.75mm printers
  • Smooth surface Without deburring, the size is engraved on the side and easy to read.
  • Solid and durable Good thermal conductivity, chamfer cut, uniform filament.

32. YONMEIA 12V 40W Cartridge Heater 620 Ceramic and NTC Thermistor 100K 3950 for 3D Printer(Pack of 10pcs) -Business, Industry & Science

by YONMEIA
  • Temperature sensor 100KΩ accuracy of ± 1%
  • Voltage: 12v, Power: 40w,Diameter: 6mm ; Length: 20mm
  • Thermistor Color : white,Cartridge Heater Material: 304 Stainless Steel
  • Conviniently pre-wired with 1 meter long high temperature teflon insulated wiring
  • Support for NTC 3950 is included in Marlin firmware, use TEMP_SENSOR 11 in firmware configuration

33. 3D Printer High Temperature Plated Copper Heater Block for PT100 Cartridge Sensor Version V6 Hotend Titan Aero Extruder (Aluminum) -Business, Industry & Science

by POLISI3D
  • This heater block is for OD 3mm cartridge temperature sensor
  • This copper-alloy is very temperature resilient, and will not start to soften or anneal until way beyond 500°C, making it perfect for the high-temperature printing
  • Copper has more than 3x the thermal conductivity of brass, and the copper alloy we use has been hardened and treated to reduce the oxidation that occurs in copper at high temperatures
  • The higher thermal conductivity will also slightly increase your heat-up times, and can provide tighter temperature control.
  • Material: Copper alloy; It is machined with very high precision and high quality

34. 14 Pcs M6 3D Printer Extruder Nozzle 0.4mm Extruder Brass Nozzle Threaded NozzlePrint Head for 1.75mm ABS/PLA 3D Printer Makerbot Creality CR-10 -Business, Industry & Science

by Kulannder
  • Replacement Nozzle: The 0.4mm M6 3D printer nozzle is a good back up or emergenices when the stock nozzle clog, our brass nozzles produce consistent printing and no clog, give you a smooth and clean printing.
  • Compatibility: Our M6 Extruder Nozzle is compatible with all 1.75mm ABS/ PLA 3D printer, work well for Monoprice select mini,Prusa i3, Anet8, Anycubic i3 mega, etc.
  • Good Design: The hole of 3D print nozzle is consistent size and machining, the threads is clean and well formed
  • The size is clear stamped on the nozzles.
  • Brass Material: The M6 extruder brass nozzle print head is made of durable and solid brass material, not easy get rust or erosion, provide long serivice life.
  • What You Get: A set includes 14pcs nozzle print head, out diameter: 0.4mm, and 0.4 number marks are printed on them for quick identification.

35. Furiga Upgrade HT-NTC100K Thermistor for Reprap Hot End Heater Block 3D Printer Parts High Temperature +300 Degrees -Business, Industry & Science

by Furiga
  • Upgrade HT-NTC100K Thermistor: Temperature measurement head cylinder diameter 3mm, length 15mm, can be used with the heating block that support the thermocouple.
  • It Adopts 304 stainless steel, with the internal temperature package to ensure the maximum service life with precision temperature measurement.
  • For customers’ convenience, the wires adopts line connection, the customer can tear the wires depends on their application
  • The high temperature line is double thicker than others in the market, not easy to break off.
  • The temperature measurement: -50 °C ~ +350 °C, can replace the original K-type thermocouple temperature, very fit for printing high-temperature filament.
  • After sales-guarantee: Need more help please email us, we will give you help within 24 hours.

36. HAWKUNG 41 Pcs 3D Printer Accessories Kit, 10 Nozzle + 3 Heater Block + 3 Throat Tube + 3 V6 Silicone Socks + 10 Cleaning Needle + Other Parts for V6 3D Printer 1.75mm Extruder Hotend -Business, Industry & Science

by HAWKUNG
  • Suitable for nozzles with a diameter of 8mm, such as V5 V6 nozzles
  • Allen wrench makes mounting and dismounting small screws easier.
  • Tweezers: 3D printing tweezers are suitable for maintenance nozzles and cleaning excess support material; it is anti-static, non-magnetic precision tweezers.
  • Cleaning needle: 10 flexible stainless steel needles for gentle maintenance of your nozzles and difficult to reach places such as feed gears.
  • V5 V6 Nozzles: Material: brass, Thread type: M6, Output diameter: 0.4 mm; Input filament diameter: 1.75 mm, Compatible: V5 and V6 extruder hotend Filament, supported: ABS / PLA / PETG / Carbon Fiber
  • Heating block spanner only fit for V6 heat block
  • Silicone socks: Will keep your heater block clean and free from burnt and blackened plastic.Helps to keep the hotend temperature extremely stable, particularly if you use high-airflow cooling around the nozzle to cool the print.
  • Spanners: Nozzle spanner make nozzle installation and removal easier

37. SOOWAY 6 Pieces 24V 40W 6 x 20 Heating Tube Pipe + 6 pieces NTC 3950 100K Thermistor For 3D Printer Hotend Hot End -Business, Industry & Science

by SOOWAY
  • Thermistor: Support for NTC 3950 is included in the Marlin firmware
  • Conveniently pre-wired with 1 meter long Teflon insulated high temperature cable.
  • Temperature sensor 100KΩ accuracy of ± 1%
  • Use TEMP_SENSOR 11 in the firmware configuration
  • Heater material: 304 stainless steel, voltage: 24V, power: 40W.
  • Please feel free to contact us for refund or replacement if there any issues, Thanks for choosing our 3D printer parts, have a nice day.

38. New Lon0167 Watch Back Featured Case Closer Presser Reliable Efficacy Crystal Glass Fitting Watchmaker Tool Gray(id:E-3-D f7 07 4cd) -3D Printer Accessories

by Lon0167
  • unexcelled : 5mm/0.5″
  • Product Name (durable in use) : Watch Case Presser;Color : (latest technology) Gray, Gold High-end product Tone
  • Please do not refer to the estimated arrival time shown on the right side of this page.)
  • Material : faultless Aluminum, Metal, Rubber;Presser Thread Dia
  • Total Size Carefully selected : 180 x 11x mind-blowing 20mm/7″ x 4.3″ formidable x 2″(L*W*T);Dies Size : Female Diameter:4mm/0.16″Oue Diameter:16mm,18mm,19mm,21mm, 23mm, 25mm,27mm,29mm, 30mm, 31mm, 33mm
  • Package Content perfect in workmanship : 1 x neat Watch Case Presser11 x Dies
    (Please note that this product ACTUAL DELIVERY TIME IS ABOUT 15-30 DAYS
  • Weight : consummate 539g

39. 20 Pcs Nozzle Cleaning Needles 0.4mm 3D Printer Needle Accessories Stainless Steel Nozzle Cleaning Tool Nozzle Cleaning Needle Filament Clog Cleaner for MK8 E3D MK10, Gold -Business, Industry & Science

by LiangDian
  • If the nozzle has foreign matter, your can use the fine needle to insert into the nozzle and drag it back and forth to bring out the impurities
  • It can also clean the nibs of paint pens and to smooth them, which can save money on replacing the nibs
  • Easy To Operate: The nozzle cleaning needle tool is very easy to use
  • The high-quality stainless steel can help you to clean the nozzle of the 3D printer well, and it can also be used for a long time and repeatedly to use.
  • You can use it to clean up the items you want to clean up.
  • Excellent Material: The cleaning needle is made of high-quality stainless steel, its sturdy, durable, flexible, corrosion-resistant, high-temperature resistant, and high-temperature oxidation resistant
  • Wide Application: This nozzle cleaning needle accessories can be used not only to clean the 3D printers such as: MK8 E3D MK10, but also to clean some small metal parts
  • You can use it safely.
  • 3D Nozzle Cleaning Gadget: This is a great nozzle cleaning tool for cleaning clogged 3D printer nozzles.Your can insert the standard needle into the nozzle, and the cleaning needle can efficiently clean the nozzle of the 3D printer, so that your printer can operate more smoothly and faster, its can improve the printing accuracy, which perfectly solves your problem.
  • You can bend it well during the cleaning process to achieve the best cleaning effect, and it is sturdy and not easily broken
  • Easy To Bend: The 3D nozzle cleaning needle is soft and its easy to bend
  • If you still cant solve it, you can remove the nozzle and use a cleaning needle for in-depth cleaning.

40. Phaetus Dragonfly Hot-End BMS -Subjects

by Phaetus
  • The hotend is mainly composed of copper alloy material, which has the advantage of faster heating and better heat dissipation.
  • The inner hole roughness of heatbreak Ra≤0.3, which allow a more smooth movement of filament, resulting a higher resolution prints.
  • All-metal kit, with overall high temperature resistance up to 500 ℃.
  • Conical fitting of heatbreak and heatsink makes a perfect heat dissipation.

Related Articles :

41. Phaetus Dragonfly Hot-End BMO -Subjects

by Phaetus
  • included_components;1x – Phaetus Dragonfly Hot-End BMO

42. Women Sandals Comfort Fashion Ankle Buckle Strappy Anti-slip Flat Platform Dress Peep Toe Shoes Slipper -Subjects

by AMURAO
  • CARE FOR YOUR FEET: Fashion high-heeled platform wedges with slippers have non-slip soles, this slippers make you look very slim and beautify the leg curve Taking style inspiration from digging what’s the most covetable.
  • UNIQUE INSOLE: A soft mat to relax your feet and provides support for the soles of the feet
  • COMFORT & HAND MADE : Durable synthetic upper,natural sole, ventilate cushion ultra soft lining.
  • FEATURES : Platform sandals for women, peep toe, 1.18″-1.97″ toe platform, cushioned insole.
  • DRESS UP OR DRESS DOWN: Pair with a swimsuit on the sandy shore or slip on with a sundress for a casual day out on the town.
  • The non-slip rubber sole at the bottom has excellent traction and stability to ensure the best anti: skid protection.

43. Sandals for Womens Platform, Stylish Comfort Summer Ankle Strap Rubber Flat Hook and Loop Shoe for Walking -Subjects

by AMURAO
  • A maust have whether it’s a special occasion or a daily use
  • COMFORT: Pamper your feet with a cushioned foot bed, and adjustable buckle strap ensures a perfect fit ideally guarantee your confidence in every step anywhere
  • Platform measures approximately 2.36″.
  • SANDALS MATERIAL : Platform Flatform Sandals for Women made of high : quality materials , Durable and soft anti slip sole will make you feel relaxed and comfortable all the day.
  • Focus on buyer satisfaction, if you have any problem, please feel free to contact us
  • NOTICES: Please choose the right size referring to the size chart attached to the picture
  • OCCASIONS: They are suitable for wedding, party, prom, brunch, business or daily occasion

Besides listing down all the deals, I’ve also have tried to include the deals from E3D, Volcano, Phaetus, E3D that way, you’ll be able to get the e3d from your preferred brand.

How to Get the Best e3d deal during this Black Friday?

1. Don’t fall for the seller-price trap

Many sellers know that Black Friday gets a boost in sales, that’s why they increase the listing price of the product and then offer a discount on it. For instance, if a e3d costs 21, then they’d increase the listing price and offer a discount on it. This act of theirs will make us (customers) feel that they’re offering a discount, but in reality, there’s not much we’re getting.

2. Buy from Reputed eCommerce Platforms (i.e. Amazon)

If you’ve checked the above listings, I’ve only included the current e3d Black Friday deals going on Amazon. It’s because I trust them. On the other hand, a lot of fake sellers launch dropshipping stores, sell fake products, and run away without delivering the product. That’s why I always recommend using a reputed platform.

3. Check Historical Prices

Like said above, the “seller-price” trap is quite high during Black Friday, Cyber Monday, etc. What you can do is, install some historical price tracking Chrome extensions and be sure that the price at which they’re selling you the e3d is lower or equal to the historical prices.

4. Buy what you need, don’t buy just because it’s cheaper

One thing I’ve realized after being an avid online shopper is, deals make you buy things you don’t need. I ended up buying $7,700 worth items last year during Black Friday and I’m hardly using the products worth $1,400. So if you look at the complete picture, I could’ve made $6,300 in assets like stocks, bonds, and would’ve gotten around 16-21% appreciation in the value.

FAQs

Where can I get the best Black Friday deal on e3d in 2022?

I’ve listed out around 43 deals available on Amazon. The reason why I recommend Amazon to everyone is because I find it trustworthy and reliable.

Can I get the same deal after Black Friday?

The deals are subject to sellers and their pricing. If the e3d they’re selling gets a newer variant, then the deal price may become permanent even after Black Friday.

How do I check if the seller hasn’t increased the price during the Black Friday week?

Well, there are many Chrome extensions and websites that allow you to track the historical prices of the products on Amazon. You can use such websites to find out if the seller has manipulated or increased the prices during the sale period.

How much would a e3d cost during Black Friday?

This is a question a lot of people have before making purchases in months of October and November (first week), I believe that the avg price if a e3d is around 21 and the current discounts on Black Friday is around 20%, so depending on the seller you can get similar discounts.

Verdict

I’ve tried my best to put in the best e3d deals during this Black Friday, I hope you like my recommendations. I’ll keep updating this page and you’ll find similar deals in the coming Black Friday 2022, so just bookmark it or save the link.

Have you found the right e3d for your needs? Here are a few other guides you might be interested in reading:

In case you’ve still not found the right deal or are looking for any other advice, then feel free to use the comment form below and get in touch. I or team members at Black Friday Zen – UK would love to assist you.